NTN 1207C3 Self Aligning Ball Bearings

C0:29.2 kN; Designation of bearing:UC211-34G2T20; H1:22 mm; S:22.2 mm; T max.:200 °C; Z:26.8 mm; G:M6x1; H:63.5 mm; L:219 mm; N1:25 mm;

Recommended tightening torque for set screw:33 Nm; B:82.6 mm; S:33.3 mm; s1:41.3 mm; Weight:5.59 kg; Designation of bearing:UC216G2T04; T min.:-40 °C; T max.:100 °C; Designation of housing:FCE216-; L:220 mm;

SW:2.5 mm; A5:16 mm; C0:4.78 kN; Weight:0.6 kg; L:91 mm; Designation of housing:EHE203-; H:65 mm; B:22 mm; L3:38 mm; T min.:-20 °C;

G:R1/8"; C:12.8 kN; S:12.7 mm; H1:9 mm; T max.:100 °C; Z:15.9 mm; C0:6.65 kN; Weight:0.47 kg; H:33.3 mm; Recommended tightening torque for set screw:3.7 Nm;

B:43.5 mm; Weight:2.16 kg; J:135 mm; A:25.5 mm; H3:110; A1:13 mm; s1:21.75 mm; T min.:-40 °C; d:50 mm; Designation of bearing:US210G2T04;

Housing Material:Stainless Steel; Retainer Material:Polymer; Anti-Rotation Pin:Yes; Bearing Series:208 Series; End Cap Groove:Yes; Ship Weight:4.4 LB; Bearing Outer Ring Material:Steel; Housing Type:Narrow Slot Take-Up; Ball Grade:Class 24; Bearing Inner Ring Material:Steel;

s1:30.5 mm; Designation of bearing:EX203G2; Dz:54 mm; L:61 mm; d:17 mm; C:12.8 kN; S:17 mm; A2:45.5 mm; Recommended tightening torque for set screw:5.5 Nm; H:112 mm;

s1:11 mm; Designation of open end cover:SCOU201-08; C0:4.78 kN; Z:42.9 mm; Dz:46 mm; S:6 mm; N:11mm; H:27 mm; T max.:100 °C; T min.:-40 °C;

d:20 mm; s1:24.2 mm; E:16 mm; A1:20 mm; J:49 mm; Designation of housing:PG204N-; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; T max.:100 °C; N:M8;

Weight:1.08 kg; H:42.9 mm; d:28.58 mm; T max.:100 °C; L1:30 mm; G:M6x1; s1:15 mm; H1:13 mm; C:19.5 kN; T min.:-20 °C;

Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; H1:15 mm; Weight:0.73 kg; S:12.7 mm; T min.:-20 °C; J:95 mm; d:15 mm; H:33.3 mm; N:13mm;

N:9mm; Designation of housing:FEE205-; L:115 mm; A1:9 mm; T max.:100 °C; A2:29 mm; A4:20.5 mm; Designation of bearing:US205-14G2T04; S:7.5 mm; H3:75;

N:18mm; H1:28.6 mm; Recommended tightening torque for set screw:22 Nm; B:61.8 mm; L:245 mm; Dz:120 mm; Designation of bearing:EX212G2; Weight:5.93 kg; Designation of open end cover:SCOE212-60; s1:53.2 mm;

C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; J:90 mm; Weight:0.46 kg; T max.:100 °C; A1:12 mm; T min.:-20 °C; S:12.7 mm; e:15 mm; Z:22.3 mm;

D3 max:115.21 mm; b min:3.1 mm; Characteristic inner ring frequency, BPFI:5.9 Hz; rNa max:0.5 mm; D:120 mm; r0 max:0.6 mm; Fatigue limit load, Cu:1.82 kN; d1:78.1 mm; b max:3.4 mm; D1:106.9 mm;